Views: 6 Author: Site Editor Publish Time: 2018-02-24 Origin: Site
Filtering: in the power supply circuit, the rectifier circuit changes the AC into pulsating DC, and after the rectifier circuit, connecting an electrolytic capacitor with a large capacity can take advantage of the charge-discharge characteristics to change the pulsating DC voltage after rectifying into a relatively stable DC voltage. In practice, in order to prevent the power supply voltage of various parts of the circuit from changing due to load changes. Therefore, in the output of the power supply and the load of the power input, there are generally tens to hundreds of micro-process electrolytic capacitors. Because of the large capacitance of electrolytic capacitors generally have a certain inductance. The interference signals of high frequency and pulse cannot be filtered effectively, so a capacitor with a capacity of 0.001-0.LpF is connected in parallel at both ends of the capacitor to filter out the interference of high frequency and pulse.
New energy vehicles, photovoltaics, wind power drive, film capacitor market has great potential
How to install low-voltage capacitors Installation precautions for low-voltage capacitors
What is a self-healing shunt capacitor -Working principle and application
How to measure whether the single-phase motor capacitor is good or bad
How to measure whether the starting capacitor of air conditioner compressor is good or bad?
The difference between starting capacitor and running capacitor of single-phase motor
How to measure whether the starting capacitor of air conditioner compressor is good or bad
Analysis on the selection and inspection method of compressor capacitor