The reason of CBB capacitors has been burnt

CBB capacitors is a common electronic components in our life. The demands  has risen steadily. The project that new energy has always been put into effect. Film capacitors has been sprang up in our country.

Some users suggested that when debugging, it was found that the 0.22uf CBB capacitor was burned. The reason may be that the capacitor is overheated and burned, which is usually caused by excessive load. Check whether the loss of CBB capacitor is too large. Or the current is related to the voltage. Although the CBB has a high withstand voltage, it also has a withstand voltage. The capacitor burns because the current is large and the current is large because the voltage is too high. After all, the current is obtained based on the voltage and impedance values.

Heat the device during the test and keep away from the CBB capacitor. Because of the short circuit of the resistor, the heat causes the nearby capacitor to rise sharply. When measuring the actual temperature when the capacitor is working, check the quality of the capacitor. Purchasing CBB capacitors to find a guaranteed manufacturer, with the development of new energy, CBB capacitors have begun to replace aluminum electrolytic capacitors. As a film capacitor manufacturer, it is our responsibility to ensure quality.

If you have technical questions, please contact us and try to answer your questions.