Views: 8 Author: Site Editor Publish Time: 2018-03-02 Origin: Site
Unit of capacitance
1F=1000000μF
1μF=1000nF=1000000pF
The basic unit of resistance is: F, in addition , μ F, pF, and a less used unit, that is,: nF. Because the capacity of capacitance F is very large, we usually see the units of μ F, NF, PF, rather than units of F.
The conversion between them is as follows:
1FU 1000000 μ F.
1 μ FU 1000nFU 1000000pF
A unit of endurance of capacitance: Vt.
Each capacitance has its voltage value, which is one of the important parameters of capacitance. The nominal voltages of ordinary non-polar capacitors are: 63V, 100V, 160V, 250V, 400V, 600V, 1000V and so on. The voltage resistance of the capacitance with polarity is lower than that of the capacitor with no polarity. The normal nominal voltages are: 4V, 6.3V, 10V, 16V, 25V, 35V, 50V, 63V, 80V, 100V, 220V, 400V and so on.
New energy vehicles, photovoltaics, wind power drive, film capacitor market has great potential
How to install low-voltage capacitors Installation precautions for low-voltage capacitors
What is a self-healing shunt capacitor -Working principle and application
How to measure whether the single-phase motor capacitor is good or bad
How to measure whether the starting capacitor of air conditioner compressor is good or bad?
The difference between starting capacitor and running capacitor of single-phase motor
How to measure whether the starting capacitor of air conditioner compressor is good or bad
Analysis on the selection and inspection method of compressor capacitor