Safety Capacitor Process Quality Control

The main inspection procedures of safety capacitor products are: first self-inspection, mutual inspection, special inspection, process control and sampling inspection, multi-process centralized inspection; check the process control table. If problems are found, report them to the technicians in a timely manner, and take corrective measures in the first time to avoid unnecessary losses.

The safety capacitor production process is from wire-solder-combination-painting-dismounting, one step at a time. During the inspection process, the problem of the boring head and the solder joint is checked by the automatic line image. The last product, a piece of porcelain has become a blue-eyed gem-safety capacitor.

Whenever I saw the beautiful CG safety capacitors, I remembered that when I first came to the porcelain valley electronics, the manual machine that appeared in my mind, the products I painted, I don’t know how many defective products, not If the pitch is too large, it is too small. It is not a thickness that does not match the hoe, the bottom, the length of the insulation, the poor appearance, etc., and the quality inspection relative to this stage. For this reason, my work for the work often conflicts with the staff. Even so, I insist on my essential work, I am responsible for the quality of safety capacitor products.