Views: 1 Author: Site Editor Publish Time: 2018-03-19 Origin: Site
Correct selection of switching switch HW emergency stop switch
When the shunt capacitor is disconnected, because of the arc action between the static and dynamic contacts of the switch ZD-09 CJ10-150A (Foshan type), it will cause the operation overvoltage. In addition to the requirement that the switching capacity of the switch is about 35% larger than that of the shunt capacitor bank, it must also be the HMI0 of the circuit breaker with high insulation recovery strength between contacts, low arc reburning and good arc extinguishing performance.
Will the square resistance of metallized film capacitors increase when they are oxidized?
How to read the parameters of film capacitors and the principle of vacuum gauges
What is the difference between wound and stacked film capacitors
How to increase the anti-interference ability of film capacitors
Will the film capacitor be damaged if the rated voltage is exceeded
