Film capacitors use steps to explain

Film capacitors use an organic film as the medium. When the voltage exceeds the rated voltage and rated current, a flame may be generated and the capacitor may be damaged. Therefore, use it in the correct circuit.

Loop design

Please confirm that the film capacitor is used only in the specified rated specifications. Please confirm whether the environment in which the capacitor is used meets the specifications.

Please select the corresponding capacitor for use according to the appropriate working conditions.

Capacitors used for bridging, bypass circuits, and antenna coupling to suppress noise, need to pass the overseas safety standards or the Electrical Appliances Safety Law of the Ministry of International Trade and Industry of Japan.

The applied voltage of the film capacitor, including the peak value of the surge and ripple voltage (DC voltage + AC peak), must not exceed the rated voltage.

Do not use more than the current that the film capacitor can carry and check the temperature around the capacitor. There are many factors that can affect the change in current, which in turn causes the temperature of the capacitor to rise.

Do not charge and discharge the film capacitor quickly, which may cause deterioration or damage to the characteristics of the capacitor.

installation:

Do not use any plug-in that exceeds the tension that the capacitor wire can withstand.

Please confirm the capacitor environment and avoid contact with any other hot objects, high pressure and other parts.

When performing the welding process, strictly follow the specified welding conditions.

Emergencies: If the device is emitting smoke, sparks or unusual odors, turn off the power, unplug or otherwise turn off the device.

Storage and handling:

It should be stored at -5 ° C ~ +30 ° C, relative humidity below 75% and ensure that there is no sudden temperature change, avoid direct sunlight exposure and exposure to corrosive gases.

There should be no excessive vibration, collision, and impact from external forces.

Scrap: For scrap film capacitors, please look for professionals who handle industrial waste.