Film capacitance measurement method

The advantage of mastering the measurement method of the capacitor is that it can quickly determine the quality of the capacitor. Then the editor wants to talk to you about the measurement method of the film capacitor, I hope to help everyone in the practical aspects. The use of scientific methods for capacitance measurement is the key to ensuring the safety and longevity of the capacitor.

You can first test the capacitor with a multimeter by using a resistor file. Practice has proved that the charging process of the capacitor can also be observed by using a digital multimeter, which actually reflects the change of the charging voltage in discrete digital quantities. With the measurement rate of the digital multimeter being n times/second, n observations that are independent of each other and sequentially increased can be seen every second during the charging process of the observation capacitor.

The following is a method for detecting a film capacitor using a digital multimeter resistor file, which is useful for a meter that does not have a capacitor file. This method is suitable for measuring large-capacity capacitors from 0.1μF to several thousand microfarads. Turn the digital multimeter to the appropriate resistance file. The red and black test leads respectively touch the two poles of the capacitor Cx under test. At this time, the display value will gradually increase from “000” until the overflow symbol “1” is displayed. If “000” is always displayed, the film capacitor is internally short-circuited; if overflow is always displayed, the internal polarity of the film capacitor may be open or the selected resistor may not be suitable.

When purchasing the capacitance of the film, we must not only know the capacitance parameters, but also learn to measure and understand whether the capacitor is damaged. This is the detail that we cannot ignore in the use of capacitors.