Views: 0 Author: Site Editor Publish Time: 2018-03-20 Origin: Site
Because many devices on electricity that convert electricity into other forms of energy are called loads, such as many electric motors in use. Because the communication current passed through the rational load electrical apparatus has to lag behind the communication voltage added at both ends by one point of view. A device that converts other forms of energy into electricity is called a power supply whose apparent power is apparent at power S) as long as a portion is converted to useful energy (active power, the ratio of the two is called the power factor Cos).
Cos=P/S combines the high voltage capacitor with rational load because the communication current of the capacitor leads to a point of view which reduces the angle between the total current and the voltage and improves the power factor. Then it can improve the utilization rate of electric energy and reduce the line loss.
New energy vehicles, photovoltaics, wind power drive, film capacitor market has great potential
How to install low-voltage capacitors Installation precautions for low-voltage capacitors
What is a self-healing shunt capacitor -Working principle and application
How to measure whether the single-phase motor capacitor is good or bad
How to measure whether the starting capacitor of air conditioner compressor is good or bad?
The difference between starting capacitor and running capacitor of single-phase motor
How to measure whether the starting capacitor of air conditioner compressor is good or bad
Analysis on the selection and inspection method of compressor capacitor