|
|
Home » News » industry information » Brief Explanation of Internal and External Factors of Failure of Ceramic Capacitor

Brief Explanation of Internal and External Factors of Failure of Ceramic Capacitor

Views: 1     Author: Site Editor     Publish Time: 2018-03-29      Origin: Site

Intrinsic factors of bearing temperature are:

1) cavities in ceramic media: the main factors leading to the formation of voids are organic or inorganic pollution in ceramic powder, improper control of sintering process, etc.

2) the main reason is related to the cooling rate during sintering, and the crack and harm are similar to the cavity.

3) delamination: the sintering of multilayer ceramic capacitors is stacked and co-fired. The sintering temperature can be as high as 1000 ℃. The interlaminar adhesion is not strong, the internal pollutant volatilization during the sintering process, and the improper control of the sintering process may lead to the stratification.

The main external factors are:

1) the temperature impact crack is mainly caused by the impact of the device during the welding, especially the wave peak welding, and improper rework is also the important cause of the temperature impact crack.


Links

Contact Us

> Tel:86-562-2821018
> Fax:86-562-2821558
> Mob:86-13305620368
> Email:mpp@film-capacitor.com
> Address:NO.1771 QiFeng Road, Shizishan Economic Development Zone,Tongling, Anhui, China
Copyright  2017 Anhui Safe Electronics Co., LTD. All rights reserved. Sitemap      Log in to my mailbox