Views: 1 Author: Site Editor Publish Time: 2018-06-07 Origin: Site
Speaking of capacitance, there is a problem compared to major manufacturers. Each manufacturer has a procurement plan, but this is only a plan. Problems may arise due to problems such as insufficient material in actual operation. The quantity of capacitors purchased is just right. If there are problems, the quantity will not be enough. If the supplier does not have stock, the production plan will be postponed; if the quantity purchased is larger than the plan, there will be an inexhaustible amount of capacitors to be stored. The following editor will tell you about how to properly store the safety capacitor.
As we all know, safety capacitors also have a shelf life, but also have the best trial period, so the safety capacitor is best used within one year. The safety capacitor is best stored in a dry and ventilated room at a temperature in the range of 5-35 degrees Celsius. The humidity should not be too high, less than 75%. Can not be directly exposed to water, salt water, oil or such an environment, toxic gas is not OK, oh. If it is not used for a long time, it must be sealed in a sealed package to avoid being exposed to the sun, because the ultraviolet rays in the sun can damage the capacitor, and it is better to be far away from the electronic product.
If you do not save properly, resulting in the capacitor's electrical performance does not meet the requirements, please do not lose him oh, there is only one earth, we have to love the earth, promote environmental protection, to the industrial waste disposal agency for landfill, incineration.
After reading the above, I believe we already know how to store safety capacitors, right? However, the editors still suggested that the purchasing department should purchase a suitable number of capacitors according to the planned changes, and that there should be no phenomenon of insufficient use or useless stacking.
How to select the withstand voltage value of electric fan starting capacitor
What impact does the starting capacitor have on the crystal oscillator output frequency?
Knowledge related to monolithic capacitors, ceramic chip capacitors, and CBB capacitors
Consequences of capacitor rated voltage not matching the power supply voltage