|
|
| Français
Home » News » industry information » What are the advantages of film capacitors and how are they made

What are the advantages of film capacitors and how are they made

Views:3     Author:Site Editor     Publish Time: 2021-04-19      Origin:Site

Advantages and manufacturing methods of film capacitors:

The film capacitor has many excellent characteristics, so it is a kind of capacitor with excellent performance.

 

Its main characteristics are as follows: non-polarity, high insulation resistance, excellent frequency characteristics (wide frequency response), and low dielectric loss.  Based on the above advantages, film capacitors are widely used in analog circuits.

 

Especially in the part where the signal is cross-connected, capacitors with good frequency characteristics and extremely low dielectric loss must be used to ensure that the signal does not cause too much distortion when it is transmitted.  Among all plastic film capacitors, polypropylene (PP) capacitors and polystyrene (PS) capacitors have the most remarkable characteristics. Of course, the prices of these two types of capacitors are relatively high.  However, in order to improve the sound quality of audio equipment, the parts and materials used have become more and more advanced, and the price is not the most important consideration. Therefore, the frequency and quantity of PP capacitors and PS capacitors used in audio equipment are also increasing.

 

Readers can often see XX brand equipment, how many XX brand-name PP capacitors or PS capacitors are used as the standard for sound quality. This is the reason.

 

The usual method of making film capacitors is to use metal foils such as aluminum as electrodes and plastic films to be overlapped and wound together.  However, there is another manufacturing method for film capacitors, called metallized film, which is to vacuum-evaporate a thin layer of metal on a plastic film to serve as an electrode.  In this way, the thickness of the electrode foil can be omitted, and the volume of the capacitor per unit capacity can be reduced, so the film capacitor is easier to be made into a small and large-capacity capacitor.

 

For example, the common MKP capacitor is the name of Metailized Polypropylene Film Capacitor, while MKT is the name of Metailized Polyester Film Capacitor.


Links

Contact Us

> Tel:86-562-2821018
> Fax:86-562-2821558
> Mob:86-13305620368
> Email:mpp@film-capacitor.com
> Address:NO.1771 QiFeng Road, Shizishan Economic Development Zone,Tongling, Anhui, China
Copyright  2017 Anhui Safe Electronics Co., LTD. All rights reserved. Sitemap      Log in to my mailbox