|
|
Home » News » industry information » Three methods of discharge of high voltage capacitors(I)

Three methods of discharge of high voltage capacitors(I)

Views: 0     Author: Site Editor     Publish Time: 2018-05-14      Origin: Site

The discharge of a general capacitor is short if the positive and negative poles of the capacitor are short circuited. And the high voltage capacitor usually does not direct short circuit discharge, in order to avoid the contact of the bad capacitor, and (at the same time the sound is so chilling) can choose the appropriate resistance or discharge with the large electrical appliances such as the desk lamp, the electric soldering iron, or the related voltage gear of the multimeter. The time can be a little longer, and it can be carried out many times. This is done until the end is done.

 

The specific steps of the high voltage capacitor discharge:

 

Method 1:

First, remove the electrical power.

Use a resistor of 20000 ohms and 2 watts, which can be bought in most electronics stores, and the price is very cheap.

Connect the probe of the resistor with the terminals of the capacitor to discharge the high-voltage capacitor.

If the capacitor has three terminals, please connect the resistor to an outside terminal and central junction column, and then connect with the remaining terminal and central terminal.


Links

Contact Us

> Tel:86-562-2821018
> Fax:86-562-2821558
> Mob:86-13305620368
> Email:mpp@film-capacitor.com
> Address:NO.1771 QiFeng Road, Shizishan Economic Development Zone,Tongling, Anhui, China
Copyright  2017 Anhui Safe Electronics Co., LTD. All rights reserved. Sitemap      Log in to my mailbox