Views: 0 Author: Site Editor Publish Time: 2018-04-20 Origin: Site
1. improper selection of current in range
Improper selection of current in the range, resulting in more locations are DC maintenance and simple harmonic vibration part. If the essential current value is larger than the current value allowed by the thin film capacitor, it will form the film capacitance heat effect, long term high temperature operation, cause the film capacitor service life greatly reduced, serious possibly burst and even be the fire burning. In the configuration test, it is allowed to measure the peak current of the actual requirement through an exclusive current probe or another method, and then to adjust the parameters of the capacitor. In the power degradation test, the temperature rise of the thin film capacitor can be measured, and the suitable selection of the film capacitor can be determined according to the temperature rise allowed parameter of the film capacitor.
2. Improper wiring
The key to the improper connection of wire is in the application of multiple parallel circuits with thin film capacitors. Because of the connection method, the line spacing is different, which causes the shunt of each parallel film capacitance to be different in the electronic circuit. In multiple parallel film capacitors, each temperature rise is different. Part of the position of the film capacitor temperature rise is too high, resulting in the destruction of the accident. Therefore, it is necessary to conduct appropriate wiring and connection to the parallel operation of the thin film capacitance, to achieve average as far as possible, to enhance the service life of the film capacitance.
3. Voltage beyond the specified range
Beyond the specified range of voltages, the most produced aspect is the simple harmonic vibration part. The developer should make a preliminary plan based on the parameters of configuration such as power, input voltage, circuit topology, load permeability, electronic circuit Q factor and so on. After the prototype begins to meet the conditions, the parameters such as peak electric peak and series resonance on both sides of the thin film capacitor during the output power period are investigated in order to further judge whether the model and parameters of the film capacitor are accurate or not.