Views: 0 Author: Site Editor Publish Time: 2019-10-16 Origin: Site
In addition to the dedicated instrument setting test at the time of measurement, what other measurement techniques can we learn? Let's take a look at how to identify the thermistor's fixed resistance.
In general, the identification of thermistor constant resistance is often identified by the detection equipment. Directly use a multimeter to measure the resistance of the resistor. When the resistance is touched by hand, the resistance value will start to change slowly. After the hand is released, the resistance value will slowly recover. This resistance is the thermistor. Generally, the resistance of the resistor is basically constant.
From the analysis of the shape, the two resistors are also very different. The ordinary resistor is basically cylindrical; the thermistor is generally disc-shaped, round-shaped, and can never be cylindrical. The so-called constant resistance refers to a resistor having a certain resistance value. It is a component that is used more in electronic instruments. There are many types of fixed-value resistors, and with the development of science and technology, new types of resistors are constantly appearing.
There are logo codes on the fixed resistors. The resistance code is usually composed of four parts: model, nominal resistance, rated power, resistance error level or tolerance. When the resistor is in use, it mainly consumes a certain amount of power, but it should not exceed the rated power, otherwise the resistance value of the resistor may change or even burn out the resistor. For the same type of resistor, its power rating can be estimated based on its geometry and surface area.
The type of the thermistor is MF or MZ, and the shape has a glyph shape, a straight rod shape, etc., and most of them are negative temperature coefficients, that is, the temperature rises and the resistance value decreases, which is abbreviated as NTC thermistor (MF). The positive temperature coefficient, the temperature rise resistance also rises, referred to as PTC thermistor (MZ).
Do you know any of the above methods of identification? We can also distinguish according to the shape and the relevant mark code, so as to ensure that the selected resistance meets the actual needs.
Knowledge related to monolithic capacitors, ceramic chip capacitors, and CBB capacitors
Consequences of capacitor rated voltage not matching the power supply voltage
Analysis of the meaning of commonly used capacitors in different circuits
Things you should check after getting the metallized film capacitor