|
|
| Français
Home » News » industry information » An introduction to the Voltage Resistance of Ceramic Chip Capacitance

An introduction to the Voltage Resistance of Ceramic Chip Capacitance

Views:0     Author:Site Editor     Publish Time: 2018-03-12      Origin:Site

      The voltage value of the ceramic chip capacitor is a design nominal value indicating that this type of capacitor can work below this voltage for a long time, if the test is to be carried out, It is applied at both ends of the ceramic chip capacitor to a voltage greater than this value (for example, when the nominal voltage 200V capacitor is applied 500V for one minute or several minutes without discharge or burst, etc.), it can work for a long time at 200V voltage.

     The above examples are only hypothetical values, in order to visually understand the voltage parameters, the specific applied voltage depends on the manufacturer's standards, or it may not be tested one by one, but only by sampling. This is a routine practice for testing capacitors, so if you do not know the specific voltage value of the ceramic chip capacitor in use, there is no way to determine its nominal voltage value.


Links

Contact Us

> Tel:86-562-2821018
> Fax:86-562-2821558
> Mob:86-13305620368
> Email:mpp@film-capacitor.com
> Address:NO.1771 QiFeng Road, Shizishan Economic Development Zone,Tongling, Anhui, China
Copyright  2017 Anhui Safe Electronics Co., LTD. All rights reserved. Sitemap      Log in to my mailbox